Search
Select Page

MP Collar and Gland Nuts, Stainless Steel

  • Acid resistant stainless steel 316L / EN1.4404 cold drawn
  • Industry standard tubing sizes: 1/4″, 3/8″, 9/16″
  • 138MPa working pressure
  • Tested for cyclic pressure resistance
  • Full material traceability
  • Clearly marked individual components

Additional collar and gland nuts are also available. Suitable for CEJN’s hose MP tube fittings with left hand threads. They are easy to install, by mounting the gland nut on the tube and then threading the collar completely so the entire collar thread is engaged. Hand tighten the connection and then create the sealed with the specified torque.

Applications: Laboratories, MP hose connections, test rigs and calibration benches.

Gland Nut Part No. Max working pressure Tube size Rec. torque (Nm) Comment
19 950 1915 20015 PSI (138.0 MPa) 1/4″ 27 7/16″ – 20 UNF
19 950 1916 20015 PSI (138.0 MPa) 3/8″ 41 9/16”-18 UNF
19 950 1917 20015 PSI (138.0 MPa) 9/16″ 75 13/16”-16 UNF
19 950 1918 20015 PSI (138.0 MPa) 3/4″ 123 3/4″-14 NPSM
19 950 1919 20015 PSI (138.0 MPa) 1″ 204 1 3/8”-12 UNF
Collar Part No. Max working pressure Tube size Rec. torque (Nm) Comment
19 950 1920 20015 PSI (138.0 MPa) 1/4″ 27 Left hand thread
19 950 1921 20015 PSI (138.0 MPa) 3/8″ 41 Left hand thread
19 950 1922 20015 PSI (138.0 MPa) 9/16″ 75 Left hand thread
19 950 1923 20015 PSI (138.0 MPa) 3/4″ 123 Left hand thread
19 950 1924 20015 PSI (138.0 MPa) 1″ 204 Left hand thread