Series 135, 300 MPa
Series 135 is a CEJN original for extremely high working pressure, 300 MPa. The series also withstands pressure up to 300 MPa while disconnected (applies to the coupling and nipple). Non-Drip connection and disconnection are standard on the CEJN High-Pressure range. The coupling also has a safety ring for the locking sleeve to prevent accidental disconnection. Plastic dust caps are standard on both coupling and nipple. Swiveling can cause wear damage over time why the nipple is available in both swivel and non-swivel designs. Each coupling and nipple are pressure tested up to full working pressure before delivery. The series makes it possible to connect pumps and accessories faster, safer and more conveniently, even at extreme pressure. The Series 135 is in the first place recommended for bearing pullers, splitters and hydraulic test installations.
|Couplings||Part No.||Remark||Connection||Length||Diameter||Hexagon||Max rec. press. cycles||Rec. torque (Nm)||Rec. seal. method|
|Female thread with 60° sealing cone||10 135 1505||–||M16x1.5||64||30||22||1000/5000||40-50||60° cone|
|Nipples||Part No.||Remark||Connection||Length||Diameter||Hexagon||Max rec. press. cycles||Rec. torque (Nm)||Rec. seal. method|
|Female thread with 60° sealing cone||10 135 6505||Standard design.||M16x1.5||55.3||25||22||1000||40-50||60° cone|
|10 135 6506||Non-swivel design.||M16x1.5||55.3||25||22||5000||40-50||60° cone|