Series 664, DN16 Pressure Eliminator
- Flat-Face design
- Connection under pressure
- One-hand operated
CEJN Series 664 is a Flat-Face quick-connect nipple with a built-in pressure eliminator. The nipple is according to and exceeds the demands in the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. The pressure eliminator allows for connection with residual/trapped pressure on the nipple side. The nipple Series 664 connects with couplings in Series 665.
The pressure eliminator nipples are also available in four other sizes; DN 6.3 (Series 264), DN 10 (Series 364), DN 12.5 (Series 564), DN 19 (Series 764). For steel couplings in accordance with ISO 16028 see Series 665.
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material nipple: Hardened steel (zinc passivation)
Material seal: Nitrile (NBR/PUR)
Connectability: With static pressure up to 400 bar on the nipple side
Max. working pressure connected: 400 bar (5801 PSI)
Max. working pressure disconnected: 400 bar (5801 PSI)
Min. burst pressure connected: 1200 bar (17404 PSI)
Min. burst pressure disconnected: 1200 bar (17404 PSI)
Disconnection under pressure: Not allowed
Comment: Connects with couplings from Series 665
Interchangeable with: All brands dimensionally interchanging with ISO16028
Rated flow is measured at 0.1 MPa pressure drop.
Approved to max working pressure Max working pressure 25 MPa according to ISO 16028
More tools are featured in tool catalog.
|Nipples with pressure eliminator||Part No.||Connection||Length||Diameter||Hexagon||Seal|
|Female thread||10 664 6201||G 3/4″ (BSP)||99.5||40||36||NBR|
|10 664 6401||3/4″ NPT||99.5||40||36||NBR|
|10 664 6101||Rc 3/4″ (BSPT)||99.5||40||36||NBR|
|10 664 6600||7/8″-14 UNF (5/8″ SAE)||99.5||40||36||NBR|
|10 664 6601||1 1/16″-12 UN (3/4″ SAE)||99.5||41||36||NBR|
|Male thread||10 664 6752||1″-14 ORFS bulkhead||129.5||40.5||36||NBR|
|10 664 6551||M26x1.5 18L||100.5||40||36||NBR|