Search
Select Page

Series 064 DN25 Pressure Eliminator

  • Flat-Face design
  • Connection under pressure
  • One-hand operated

 

CEJN Series 064 is a Flat-Face quick-connect nipple with a built-in pressure eliminator. The nipple is according to and exceeds the demands in the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. The pressure eliminator allows for connection with residual/trapped pressure on the nipple side. The nipple Series 064 connects with couplings in Series 065.

 

The pressure eliminator nipples are also available in five smaller sizes; DN 6.3 (Series 264), DN 10 (Series 364), DN 12.5 (Series 564), DN 16 (Series 664) and DN19 (764).

Technical data

Temperature range: -30°C — +100°C (-22°F — +212°F)

Material nipple: Hardened steel (zinc passivation)

Material seal: Nitrile (NBR/PUR)

Connectability: With static pressure up to 400 bar on the nipple side

Max. working pressure connected: 350 bar (5076 PSI)

Max. working pressure disconnected: 350 bar (5076 PSI)

Min. burst pressure connected: 1200 bar (17404 PSI)

Min. burst pressure disconnected: 1200 bar (17404 PSI)

Disconnection under pressure: Not allowed

Comment: Connects with couplings in CEJN 065 series and other brands DN25 – 1″ couplings within the ISO 16028 standard

Interchangeable with: All brands dimensionally interchanging with ISO16028

Rated flow is measured at 1 bar pressure drop.

Flow measured with coupling Series 065.

Nipples with pressure eliminator Part No. Connection Length Diameter Hexagon Seal
Female thread 10 064 6203 G 1″ (BSP) 138 55 46 NBR
10 064 6204 G 1 1/4″ (BSP) 142 60 55 NBR
10 064 6603 1 5/16″-12 UN (1″ SAE) 146.4 50 46 NBR
10 064 6104 Rc 1 1/4″ (BSPT) 142.3 60 55 NBR
10 064 6280 G 1″ JIS ORB 137 55 46 NBR
10 064 6281 G 1 1/4″ JIS ORB 142 60 55 NBR
10 064 6403 1″ NPT 138 55 46 NBR
10 064 6404 1 1/4″ NPT 137.8 60 55 NBR