Search
Select Page

Venturi blowers

Compressed air or saturated steam is the power source for our Venturi Blower line. Small volumes of high velocity air (from the compressed air source) run through the casting and out the nozzle jets, creating a venturi or pulling action that creates large volumes of air through the Venturi and out the air diffuser.

A 1/2” hose with a “crows foot” connection is recommended from your air supply source to the side inlet connection. The compressor size required can be determined by checking the chart on air consumed at various inlet pressures. Operate this Venturi Blower on air or steam lines limited to 140 psi.

  • Lightweight construction
  • Convenient carry handles for one-person portability to any location
  • No guards required
  • Multiple inlet ports
  • Sturdy steel galvanized steel diffuser
  • All models include a crow’s foot inlet connection
  • Static ground connection attached to the inlet housing (for use in hazardous locations)
  • Single piece cast aluminum inlet housing
Dimensions Air Flow
Part No. Overall Length (mm) Diameter of Base (mm) Diameter Top of Horn (mm) Thread (BSP) Bolt Circle Diameter (mm) Weight (kg) Air Consumed (m³/h) Total Air Flow (m³/h)
4,1 bar 6,9 bar 4,1 bar 6,9 bar
9518-03S 425 186 152 1/2″ 167 2,5 48 80 1 470 2 050
9518-03 775 186 178 1/2″ 167 3,9 48 80 1 930 2 490
9518-06 1 124 286 318 1″ 267 10,1 96 160 4 350 6 290
9518-08 1 170 365 362 1″ 346 16,3 176 288 7 160 9 230
9518-10 1 219 445 400 1″ 394 19,1 304 608 1 0500 13 970