Search
Select Page

Series 607 TLX – ¾”

TLX is a Flat-Face twist lock coupling for the toughest applications in the construction and demolition segment. This super-duty quick connect coupling is designed to work with the highest surge flows and the toughest pressure impulses. TLX is made from high alloy steels with Zinc-Nickel surface treatment for a long life in the harshest conditions. The Series is available in sizes from ½” to 1 ½” to cover most applications.

 

– The couplings and nipples are also available in 4 other sizes: ½” (Series 507), 1” (Series 707), 1 ¼” (Series 807) and 1 ½” (Series 907)

Technical data

Flow rate: 169 l/min (37.2 GPM) @ 3bar ΔP **
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material coupling: High alloy steels with Zinc-Nickel surface
Material nipple: High alloy steels with Zinc-Nickel surface
Material seal: Nitrile (NBR)
Max. working pressure connected: 420 bar (6091 PSI)
Max. working pressure disconnected: 400 bar (5801 PSI)
Min. burst pressure connected: 1680 bar (24366 PSI)
Min. burst pressure disconnected: 1000 bar (14503 PSI)
Connectability: Connection with residual pressure only limited by operator strength
Disconnection under pressure: Disconnection with residual pressure in the system is allowed

(**) – If the application is constantly above this flow rate on respective coupling size, a larger coupling size should be considered to avoid too high pressure drop. The couplings can handle much higher flow rate during short time periods, but there is a risk of heat build-up in the system. Surge flows far above normal flow rate is in general not a problem.

– TLX is pressure impulse tested at 525 bar (7614 psi) for 1.000.000 impulses acc. to ISO 7241-2. (Flow Rate) – If the application is constantly above this flow rate on respective coupling size, a larger coupling size should be considered to avoid too high pressure drop. The couplings can handle much higher flow rate during short time periods, but there is a risk of heat build-up in the system. Surge flows far above normal flow rate is in general not a problem.

Couplings Part No. Connection
Female thread 10 607 1101 Rc 3/4″
10 607 1103 Rc 1″
10 607 1203 G 1″
10 607 1301 G 3/4″
10 607 1231 G 3/4″ JIS ORB
10 607 1401 3/4″ NPT
10 607 1601 1 1/16″-12 UN (3/4″ SAE)
Nipples Part No. Connection
Female thread 10 607 6101 Rc 3/4″
10 607 6103 Rc 1″
10 607 6301 G 3/4″
10 607 6203 G 1″
10 607 6231 G 3/4″ JIS ORB
10 607 6401 3/4″ NPT
10 607 6601 1 1/16″-12 UN (3/4″ SAE)