Search
Series 307 TLX – 3/8”
TLX is a Flat-Face twist lock coupling for the toughest applications in the construction and demolition segment. This super-duty quick connect coupling is designed to work with the highest surge flows and the toughest pressure impulses. TLX is made from high alloy steels with Zinc-Nickel surface treatment for a long life in the harshest conditions. The Series is available in sizes from ½” to 1 ½” to cover most applications.
– The couplings and nipples are also available in 4 other sizes: ¾” (Series 607) 1” (Series 707) 1 ¼” (Series 807) and 1 ½ ” (Series 907)
Technical data
| Flow rate: | 40 l/min ** |
| Temperature range: | -30°C — +100°C (-22°F — +212°F) |
| Material coupling: | High alloy steels with Zinc-Nickel surface |
| Material nipple: | High alloy steels with Zinc-Nickel surface |
| Material seal: | HNBR |
| Max. working pressure connected: | 420 bar (6091 PSI) |
| Max. working pressure disconnected: | 420 bar (6091 PSI) |
| Min. burst pressure connected: | 1680 bar (24366 PSI) |
| Min. burst pressure disconnected: | 1000 bar (14503 PSI) |
| Connectability: | Connection with residual pressure only limited by operator strength |
| Disconnection under pressure: | Disconnection with residual pressure in the system is allowed |
(**) – If the application is constantly above this flow rate on respective coupling size, a larger coupling size should be considered to avoid too high pressure drop. The couplings can handle much higher flow rate during short time periods, but there is a risk of heat build-up in the system. Surge flows far above normal flow rate is in general not a problem.
– TLX is pressure impulse tested at 525 bar (7614 psi) for 1.000.000 impulses acc. to ISO 7241-2. (Flow Rate) – If the application is constantly above this flow rate on respective coupling size, a larger coupling size should be considered to avoid too high pressure drop. The couplings can handle much higher flow rate during short time periods, but there is a risk of heat build-up in the system. Surge flows far above normal flow rate is in general not a problem.
More tools are featured in tool catalog.
Similar products:
Technical data:
| Coupling | Part No | Connection |
| Female thread | 10 307 1204 | G 3/8″ |
| 10 307 1205 | G 1/2″ | |
| Nipple | Part No | Connection |
| Female thread | 10 307 6204 | G 3/8″ |
| 10 307 6205 | G 1/2″ | |