Search 
Air & Fluid Guns Accessories
Removable accessories for Series 208 and 210 blowguns. Various tubes and tips are available to meet specific application requirements.
More tools are featured in tool catalog.
Similar products:
Technical data:
| Rubber-tip nozzle | Part No. | Description | |
 |
Ø 14 mm (1/2″) | 11 208 9956 | Fits directly onto the tube. For use against sensitive surfaces. Suitable for pressurizing, such as in leakage or cylinder testing. Nozzle available in three sizes, individually and as a set. |
| Ø 25 mm (1″) | 11 208 9957 | Fits directly onto the tube. For use against sensitive surfaces. Suitable for pressurizing, such as in leakage or cylinder testing. Nozzle available in three sizes, individually and as a set. | |
| Ø 35 mm (1 1/3″) | 11 208 9958 | Fits directly onto the tube. For use against sensitive surfaces. Suitable for pressurizing, such as in leakage or cylinder testing. Nozzle available in three sizes, individually and as a set. | |
| 3-piece set (Ø 14, 25 and 35) | 11 208 9960 | Fits directly onto the tube. For use against sensitive surfaces. Suitable for pressurizing, such as in leakage or cylinder testing. Nozzle available in three sizes, individually and as a set. | |
| Bypass nozzle | Part No. | Description | |
 |
– | 11 208 9961 | Fits directly onto the tube. When dead-ended, pressure is released (or diverted) through the side outlets, reducing the maximum outlet pressure to less than 2 bar (29 PSI). |
| Air curtain nozzle | Part No. | Description | |
 |
– | 11 208 9954 | Fits directly onto the tube. Creates a protective air curtain that is suitable for deflecting lightweight chips or fluids and diverts air when dead-ended, reducing the outlet pressure to less than 29 PSI (2 bar). |
| Chip shield | Part No. | Description | |
 |
– | 11 208 9955 | Fits directly onto the tube. Protects operators from flyaway chip debris. For placement anywhere on the tube. Nitrile bushing for easy mounting. Translucent shield diameter: 100 mm (4″) |
| Silencer | Part No. | Description | |
 |
– | 11 208 9962 | Fits directly onto the tube. Reduces noise effectively when low noise is a requirement. Sound level: 82 dB(A). |
| Venturi Nozzle | Part No. | Description | |
 |
11 208 9963 | Fits directly onto the tube. Draws in ambient air for extra high flow. Increases air flow by 100%. Suitable for deflecting lightweight wood chips and diverts air when dead-ended, reducing the outlet pressure to less than 2 bar (29 PSI). | |
| Silencer nozzle | Part No. | Description | |
 |
– | 11 208 9965 | Fits directly onto the threads of blowgun body. For use when space is limited. |
| Star-Tip Tube | Part No. | Description | |
 |
90 mm (4″) | 11 208 3215 | Fits directly onto the threads of blowgun body. Air flow: 190 l/min (7 CFM). |
 |
Blowgun 210 | 11 210 0230 | Fits directly onto the threads of blowgun 210 body. The 90 mm (4″) tube is straight for optimal handling ergonomics.The Star-tip feature diverts the air when dead-ended making it OSHA-compliant. |
| Extension tube | Part No. | Description | |
 |
300 mm (12″) | 11 208 3219 | Fits directly onto the threads of blowgun body. Offers increased access in hard-to-reach areas, along with silencing and OSHA-compliant features. Air flow: 180 l/min (6 CFM) |
| 500 mm (20″) | 11 208 3220 | Fits directly onto the threads of blowgun body. Offers increased access in hard-to-reach areas, along with silencing and OSHA-compliant features. Air flow: 180 l/min (6 CFM) | |
| 300 mm (12″) | 11 208 0219 | Fits directly onto the threads of blowgun body. Offers increased access in hard-to-reach areas. Air flow: 380 l/min (13 CFM) | |
| 500 mm (20″) | 11 208 0220 | Fits directly onto the threads of blowgun body. Offers increased access in hard-to-reach areas. Air flow: 380 l/min (13 CFM) | |
| Tube regulator | Part No. | Description | |
 |
90 mm (4″) | 11 208 0216 | Fits directly onto the threads of blowgun body. Reduces the outlet pressure to a safe level in the event of blockage in the tube or when dead-ended. |
| Tube | Part No. | Description | |
| 90 mm (4″) | 11 208 0215 | Fits directly onto the threads of blowgun body. Air flow: 500 l/min (18 CFM). | |
| Bendable extension tube | Part No. | Description | |
 |
400 mm (16″) | 11 208 0222 | Fits directly onto the threads of blowgun body. Can be bent and adjusted for specific tasks in hard-to-reach areas. Bendable 6-mm (1/4″) coated copper tube. Air flow: 120 l/min (4 CFM) |
| Sprayer Kit | Part No. | Description | |
 |
Rc 1/4″ air connection | 11 208 3180 | The CEJN Sprayer Kit includes a 208 blowgun that can be detached and used separately. The nozzle is designed to spray a full, dense mist for optimum cleaning. Fluid flow and fluid/air mixture can be easily adjusted. The OSHA-compliant spray nozzle bowl makes the product safe to use. Max working pressure 16 bar (230 PSI). Canister capacity 1.2 l (0,26 gl UK). |
| Sprayer Attachment | Part No. | Description | |
 |
Blowgun 208 | 12 010 3137 | Turns the blowgun into a sprayer for cleaning liquid and other chemicals (not to be used with detachable tubes). Requires the 208 90-mm (4″) standard outlet tube. Meets OSHA requirements. Max working pressure 16 bar (230 PSI). Canister capacity 1.2 l (0,26 gl UK) |
| Adjustable jet nozzle | Part No. | Description | |
 |
Blowgun 210 | 11 210 0200 | Fits directly onto the threads of blowgun 210 body. Nozzle adjusts flow from a narrow jet for reaching hard to-to-remove debris to a wide beam for cleaning wide-open surface. |
| Adjustable fluid nozzle | Part No. | Description | |
 |
Blowgun 210 | 11 210 0210 | Fits directly onto the threads of blowgun 210 body. Nozzle adjusts flow from a narrow jet for reaching hard to-to-remove debris to a wide beam for cleaning wide-open surface with liquid media. |
| Straight tube | Part No. | Description | |
 |
Blowgun 210 | 11 210 0220 | Fits directly onto the threads of blowgun 210 body. The 90 mm (4″) tube is straight for optimal handling ergonomics. |
| Magnet holder | Part No. | Description | |
 |
Blowgun 210 | 11 210 9000 | By complementing the blow gun Series 208 and 210 with a magnet holder, customers facilitate the daily work and increase the flexibility of the suspension. The holder is easily assembled on either the right or left hand side of the gun. |